W3DJS -  Ham Pie V1.4
              PAT ardop
               Add Adrop Gui and json file to .Ardop file.  You will 
               have to them from the Build-a-Pi build.

               Run in a CMD window:  pat confiure
                                                  put your call sign beteen the double quotes for "mycall="
                                                  put your Winlink password between the double quote for "password 
                                                  change the locator code ( also called Grid or Maidenhead) to your location (ie EN71KI)
                            To get web service started:
               Run a CMD window as administrator.
               type: sudo pat http
                       sudo system ctl start pat@pi
                       sudo systemctl enable pat@pi
                       reboot your pi
               or
                Add "pat --mycall $CALLSIGN http"  to the 2 meter and adrop 
               modem startup files just before the pat website start up.

KM4ACK - Build-a-Pi V3.03

                In a terninal run "sudo apt-get install libudev-dev"
                This allows the usb to operate properly.

                 WFVIEW
                To get wfview to install use the the wfview.sh script
                Debian Build Script:
                For debian-based systems (Ubuntu, Mint, Debian, Raspberry Pi, etc), you may obtain
                the latest version of the master branch of wfview by running this build script:

                https://gitlab.com/eliggett/scripts/-/blob/master/fullbuild-wfview.sh

                Simply download the script to ~/Downloads and run the following commands:

                cd ~/Downloads
                chmod +x fullbuild-wfview.sh
                ./fullbuild-wfview.sh
                The script will install dependencies, download the source code for wfview, compile, 
                and install. You may edit the script to specify a specific code branch if you wish
                (see the script code for details). You may run the script any time to obtain the latest 
                version of wfview (beta-quality). If the script fails, re-download the script and try again.

                Once the build is complete, go to the build directory
                under the wfview directory under build-a-pi.run the
                install.sh. Open the intall.sh in a text editor. At the
                bottom of the install.sh are four lines of code that 
                will have to be copied and ran in a ternimal using sudo
                in front of the commands to make wfview run from the 
                MENU.



IC7300 CI-V setting
                 ACC/USB OUTPUT SELECT                                         AF
                 ACC/USB AF OUTPUT SELECT                                   35%
                 ACC/USB AF SOL                                                       ON
                 ACC/USB AF BEEP OUTPUT SPEECH... OUTPUT       ON 
                 ACC/USB IF OUTPUT SELECT                                    50%
                 ACC MOD LEVEL                                                       50%
                 USB MOD LEVEL                                                       40%
                 DATA OFF MOD                                                      USB,ACC
                 DATA MOD                                                                 USB
                 CI-V 
     		CI-V BAUD RATE                                              94H
		CI-V TRANSCEIVE                                            ON
                            CI-V USB REMOTE TRANSCEIVE ADDRESS     00H
                            CI-V OUTPUT (FOR ANT)                                   OFF
		CI-V USB PORT UNLINK FROM [REMOTE]
                            CI-V USB BAUDRATE                                       AUTO
                            CI-V USB ECHO BACK                                      ON
 	   USB SERIAL FUNCTION                                              CI-V

USEFUL LINUX COMMANDS

	USB LIBRARY 
              sudo apt-get install libudev-dev

              udev rules 
              /etc/udev/rules.d/50-udev.rules

              sudo apt-get update
              sudo apt-get upgrade
              sudo apt-get dist-upgrade
              
              sudo pass root                      to change root password
              sudo adduser pi dialout         add pi to dialout for usb 
              lsusb -v | less                       staus of usb ports
              
              to disable voice reader :  
              goto :  Recommended Software
                        Universal Access
                        ORCA    uncheck

              installing debian packages
              sudo dpkg -i _____.deb